Home > Products > Fiber Optics > Fiber Optic Distribution Box > Fiber Access Termination Box F2E-601-16E

Fiber Access Termination Box F2E-601-16E

RGP-F2E-601-16E Fiber Access Termination Box fiber access terminal is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

RGP-F2E-601-16E Fiber Access Termination Box fiber access terminal is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box, and meanwhile it provides solid protection and management for the FTTx network building.

Fully enclosed structure.

Material: PC+ABS, waterproof, dustproof, anti-aging design, IP-65 protection level for outdoor.

Integrated with 2 x splice trays,splice tray can be flipped up, and maximum 32F splice capacity.

Fiber bend radius control more than 40mm.

1 x mid-span cable entrance for uncut cable with maximum diameter 12mm .

 

Maximum 120F splice capacity, stainless anti-rust bolts and nuts.

Plug-and-play installation, easy for maintenance and expansion.

1x8 PLC splitter can be installed in each splice tray.

16pcs of pre-installed reinforced water-proof adapters for SC.

Cable, pigtails, and patch cords are running through their own paths without disturbing each other, Easy for maintenance and expansion.

1 mid-span cable entrance(10-16.5mm) for uncut cable and 2 reserved cable entrances for distribution cable gland(8-13.5mm).

 

Specification:

Environmental requirement

Working temperature:-40℃~+85℃.

Relative humidity:≤85% (+30℃).

Atmospheric pressure:70KPa~106Kpa.

 

Main technical:

Insertion loss:≤0.15dB.

UPC return loss:≥50dB.

APC return loss:≥60dB.

 


Wall mounted installation

Pole mounted installation

Aerial hanging installation

Suitabe for pre-connectorized drop cable with reinforced connector

Configuration

Model No.

Spliced fiber storage capacity

Height x diameterCable portsMax. diameter of cable(mm)Applicable Cable DiameterPLC Splitter
RGP-F2E-601-16E

120 Splices

5pcsx24 Splices

345mmx220mm x95mm

1 Uncut Port +16 pcs of

FTTH Drop Cable.

1 uncut of port can support the

maximum diameter Φ16.5 mm

16 Round for pre-connectorized

reinforced water-proof adapters for SC

2 pc of 1x8 PLC Splitter

Related Products

16 Core Fibre Optic Distribution Box FDB-016A
16 Core Fibre Optic Distribution Box FDB-016A

RGP-FDB-016A Fibre Optic Distribution Boxes are designed for use in both fibre-to-the-home and fibre-to-the-premises networks for point-to-point or PON network architectures, both indoor and outdoor models are available to accommodate either standard cables or window cut (break out) cables.

Fiber Access Termination Box F2E-601-16G
Fiber Access Termination Box F2E-601-16G

RGP-F2E-601-16G Fiber Access Termination Box fiber access terminal is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

24 Core Fibre Optic Distribution Box FDB-024B
24 Core Fibre Optic Distribution Box FDB-024B

RGP-FDB-024B 24 Core Fibre Optic Distribution Boxes are designed for use in both fibre-to-the-home and fibre-to-the-premises networks for point-to-point or PON network architectures

16 Core Fibre Optic Distribution Box FDB-016E
16 Core Fibre Optic Distribution Box FDB-016E

FDB-016E Fiber Access Termination Box with pre-terminated cable could be able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.