Home > Products > Fiber Optics > Fiber Optic Distribution Box > Fiber Access Termination Box F2E-601-8A

Fiber Access Termination Box F2E-601-8A

RGP-F2E-601-8A Fiber Access Termination Box fiber access terminal is able to hold up to 8 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.

RGP-F2E-601-8A Fiber Access Termination Box fiber access terminal is able to hold up to 8 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box, and meanwhile it provides solid protection and management for the FTTx network building.

Fully enclosed structure.

Material: PC+ABS, waterproof, dustproof, anti-aging design, IP-65 protection level for outdoor.

Integrated with 2 x splice trays,splice tray can be flipped up, and maximum 32F splice capacity.

Fiber bend radius control more than 40mm.

1 x mid-span cable entrance for uncut cable with maximum diameter 12mm .


Maximum 120F splice capacity, stainless anti-rust bolts and nuts.

Plug-and-play installation, easy for maintenance and expansion.

1x8 PLC splitter can be installed in each splice tray.

8 pcs of pre-installed reinforced water-proof adapters for SC.

Cable, pigtails, and patch cords are running through their own paths without disturbing each other, Easy for maintenance and expansion.

1 mid-span cable entrance(10-16.5mm) for uncut cable and 2 reserved cable entrances for distribution cable gland(8-13.5mm).

 

Specification:

Environmental requirement

Working temperature: -40℃~+85℃.

Relative humidity: ≤85% (+30℃).

Atmospheric pressure: 70KPa~106Kpa.


Main technical:

Insertion loss:≤0.15dB.

UPC return loss:≥50dB.

APC return loss:≥60dB.


Wall mounted installation

Pole mounted installation

Aerial hanging installation

Suitabe for pre-connectorized drop cable with reinforced connector

Configuration

Model No.Spliced fiber storage capacityHeight x diameterCable portsMax. diameterof cable(mm)Applicable Cable DiameterPLC Splitter
RGP-F2E-601-8A

120 Splices

5pcs x 24 Splices

345mmx220mm x95mm

1 Uncut Port +8 pcs

of FTTH Drop Cable.

1 uncut of port can support the

maximum diameter Φ16.5 mm

8 Round for pre-connectorized pre-installed

reinforced water-proof adapters for SC.

1 pc of 1x8 PLC Splitter

Related Products

2 Core Fiber Optic Distribution Box FDB-02A
2 Core Fiber Optic Distribution Box FDB-02A

RGP-FDB-02B 2 Core Fibre Optic Distribution Boxes are designed for use in both fibre-to-the-home and fibre-to-the-premises networks for point-to-point or PON network architectures, both indoor and outdoor models are available to accommodate either standard cables or window cut (break out) cables.

Fiber Optic Splice Closure F2E-601-16H
Fiber Optic Splice Closure F2E-601-16H

RGP-F2E-601-16H Fiber Optic Splice Closures design to protect joints of optical cable can hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in the FTTx communication network system. Available for 2 trays and each tray can splice 24 fibers.

16 Core Fiber Optic Distribution Box with PLC Splitter FDB-016G
16 Core Fiber Optic Distribution Box with PLC Splitter FDB-016G

RGP-FDB-016G Fiber Optic Distribution Box is used for connecting optical cable with various equipment in FTTX optical access network node.

4 Core Fibre Optic Distribution Box FDB-04C
4 Core Fibre Optic Distribution Box FDB-04C

RGP-FDB-04C 4 Core Fibre Optic Distribution Boxes are designed for use in both fibre-to-the-home and fibre-to-the-premises networks for point-to-point or PON network architectures, both indoor and outdoor models are available to accommodate either standard cables or window cut (break out) cables.