Home > Products > Fiber Optics > Fiber-Optic Distribution Frame > 19" Rack-Mount Chassis with LGX Module ODF-RF48B

19" Rack-Mount Chassis with LGX Module ODF-RF48B

RGP-ODF-RF48B 19" Rack-Mount Chassis with LGX Module is modularized design with Insert Splitter inside and cold-rolled steel box, coated anti-corrosive paint. It could be pre-installed with various kinds of fiber optic adapters and pigtails.

RGP-ODF-RF48B 19" Rack-Mount Chassis with LGX Module is modularized design with Insert Splitter inside and cold-rolled steel box, coated anti-corrosive paint. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is with standard 19 inch size and properly designed to control the bend radius of the cable inside the enclosure to avoid extra optical loss, this frame is ideal for indoor fiber optic cables connection storage, distribution and management.


Feature:

Material: Cold-Roll Steel Box and anticorrosive paint (housing).

Can be used in 19" Standard distribution frame, light weight and reasonable structure.

Front covers have special lock (pressure closure) can be opened for installation Insert Splitter.

Front mark on the plate is easy for identification and operation.

Designed for protection against electrical interference ( over-voltage and over-current ), according ITU-T Rec K.11.

Supplied with all accessories required for proper assembly and connection to transmission and test equipment.


Plug-and-play special lock can easy to install Insertion Splitter. Compliance with ITU-T L.50 standard .

Various panel plate to fit different adapter interface ( FC,SC,LC,ST ).

Bending radius in any part of the organizing unit > 30mm.

The trays could be pulled out for operation, which makes installation easy and convenient , Easy for management and operation .

Application:

FTTH access network.

Telecommunication Networks.

CATV Networks.

Data communications Networks.

Local Area Networks.


Configuration

Table 1 - 1×N PLC Splitter

Parameters1×21×41×81×161×321×64
Operating Wavelength (nm)1260~1650
Fiber TypeG657A1 or customer specified
Insertion Loss(dB) (P/S Grade)3.8/4.07.1/7.310.2/10.513.5/13.717/17.420/20.4
Loss Uniformity (dB)0.40.60.81.21.52.0
Polarization Dependent Loss(dB)0.20.20.20.250.30.35
Return Loss(dB) (P/S Grade)55/5055/5055/5055/5055/5055/50
Directivity (dB)555555555555
Wavelength Dependent Loss(dB)0.30.30.30.50.50.5
Temperature Stability (-40~85℃)(dB)0.40.40.40.50.50.5
Operating Temperature (℃)-40~85
Storage Temperature (℃)-40~85

  Configuration :

ModelCapacityDimensionPCS/CartonG.W/CartonSize of Carton
RGP-ODF-RF48B 

144 pcs SC Adapter,

16 pcs 1x8 splitter (LGX slot)

485mmx250mmx130mm6 PCS15 KGS495mmx510mmx405mm



Related Products

Fiber Optic Distribution Frames GPX109B
Fiber Optic Distribution Frames GPX109B

Fiber Optic Distribution Frames, it is applicable to central offices and optical branches, it serves such functions as leading in fixing and protecting optical cables, storing and managing pigtails, and fixing and cross-connection.

72 Core Fiber Optic Distribution Unit ODF-RF72A
72 Core Fiber Optic Distribution Unit ODF-RF72A

Rack-Mount Fiber Optic Distribution Unit is a modularized design with sliding trays inside and cold-rolled steel box, coated anti-corrosive paint. It could be pre-installed with various kinds of fiber optic adapters and pigtails, provide cross-connect and interconnect between incoming fiber optic cables and fiber optic equipment.

48 Core Fiber Optic Distribution Unit ODF-RF48A
48 Core Fiber Optic Distribution Unit ODF-RF48A

Rack-Mount Fiber Optic Distribution Unit is a modularized design with sliding trays inside and cold-rolled steel box, coated anti-corrosive paint. It could be pre-installed with various kinds of fiber optic adapters and pigtails, provide cross-connect and interconnect between incoming fiber optic cables and fiber optic equipment.

Fiber Optic Distribution Frames GPX109A
Fiber Optic Distribution Frames GPX109A

Fiber Optic Distribution Frames, it is applicable to central offices and optical branches, it serves such functions as leading in fixing and protecting optical cables, storing and managing pigtails, and fixing and cross-connection.