Home > Products > Fiber Optics > Fiber Optic Patch Panel > Fiber Optic Cable Terminal Box GZFB-2011A

Fiber Optic Cable Terminal Box GZFB-2011A

RGP-GZFB-2011A  The Optical Fiber Cable Terminal Box is designed for space-saving and high-density applications. The patch panel is made of 16 gauge cold rolled steel(CRS) with a black or grey powder-coated finish. Equipped adopt removable back cover, it allows a simplified from access, inside-panel manipulation and splices.

RGP-GZFB-2011A  The Optical Fiber Cable Terminal Box is designed for space-saving and high-density applications. The patch panel is made of 16 gauge cold rolled steel(CRS) with a black or grey powder-coated finish. Equipped adopt removable back cover, it allows a simplified from access, inside-panel manipulation and splices.


Adapter strips up to 48 fibers, is used for fiber termination and cross-connection. It is suitable for connecting all kinds of cables and protects optical fiber connectors.

 

FC, SC and LC adapters available, modular design, convenient for fixation and maintenance.


Features:

High quality sheet metal material, electrostatic spraying treatment on the surface, good mechanical performance, Elegant appearance, robustness and durability.

Suitable for indoor ,wall-mounted installation.

FC, SC and LC adapters available , modular design, convenient for fixation and maintenance.

Standard color is RAL 9005 black ; RAL 7035 light grey is also available.

 

Cable clamps on the inner surface for fixing cable.

Front and back flexible wire guard.

Installation hardware and instruction manual included.

 

Built-in stacked splice trays, easy to open, the splice tray can be taken down, easy for installation and maintenance.

Pigtail fastened by imported elastomer, fixed reliably and convenient for use.

Offer fixing devices for cables, pigtails, and grounding device inside the box.

Fibre route reasonable, fibre bending radius at any place is greater than 30mm.


Performance:
Operating temperature: -5℃~+40℃(Indoor type),-20℃~+60℃(Outdoor type).
Ambient humidity: ≤95%(+40℃).
Atmospheric pressure: 70 kPa~106 kPa.


Insulation resistance: not less than 2 x 104 M Ω / 500 V (DC).
Withstand Voltage: not less than 3000V(DC/1min.
Insertion loss (dB): ≤0.3dB.
Return loss (dB): PC type≥45dB, UPC type≥50dB, APC type≥60dB.



Application:
FTTX application.
Consolidation point.
Datacenter & Central Office.
Cellular tower base station.
LAN & WAN projects.


Complied Standards :
Meet national standards, such as YD/T925-2009, GB/T2423-2008, GB/T3873-1998, GB/T 9286-1998, and international standards, such as IEC 61300-3-15, IEC 61300-3-16, IEC 61300-3-17, IEC 61300-3-23, etc.


Configuration

Order Information :

NameTypeDimension    (HxWxD)Core Capacity Tray (Cores)Max diameter of cable(mm)Working EnvironmentNote

Fiber Optic Cable

Terminal Box 

RGP-GZFB-2011A270mm×130mm×40mm8 Coreφ22

 Wall-Mounted /

Indoor Installation

  Adaptor Type
270mm×140mm×45mm12 Coreφ22
270mm×140mm×75mm24 Coreφ22
270mm×140mm×150mm48 Coreφ22



Related Products

19 Inch 96 Core Slide Out Fiber Optic Patch Panel GZFB-2022C-R96
19 Inch 96 Core Slide Out Fiber Optic Patch Panel GZFB-2022C-R96

The Slide out 19 Inch Fiber Optic Patch Panel is designed for space-saving and high-density applications. The patch panel is made of 16 gauge cold rolled steel(CRS) with a black or grey powder-coated finish. Equipped with sliding drawer and removable back cover, it allows a simplified from access, inside-panel manipulation and sp

19 Inch Fixed Fiber Optic Patch Panel GZFB-2055A
19 Inch Fixed Fiber Optic Patch Panel GZFB-2055A

19 Inch Fixed Fiber Optic Patch Panel is a fiber organization solution that is mounted in place and does not slide out. The patch panel is made of 16 gauge cold rolled steel(CRS) with a black or grey powder coated finish.

19 Inch 48Core Swing Out Fiber Optic Patch Panel GZFB-2088A-R48
19 Inch 48Core Swing Out Fiber Optic Patch Panel GZFB-2088A-R48

19 Inch Swing Out Fiber Optic Patch Panel is a style of fiber optic housing that swings outward to allow access to components inside no need for removing the panel above. This facilitates termination and splicing while keeping network connections secure.

Wall Mount Fiber Optic Distribution Box KJN-3011A
Wall Mount Fiber Optic Distribution Box KJN-3011A

The wall mount fiber optic distribution box products include a variety of two door wall mount box configurations, these products are designed specifically to act as part of the fiber distribution system in an enterprise networkcell site backhaul network, or as the demarcation point for the service provider ar the customer's location,