Home > Products > Fiber Optics > Fiber Optic Splice Closure > Dome Fiber Optic Splice Closure TSB-301A

Dome Fiber Optic Splice Closure TSB-301A

RGP-TSB-301A Dome Fiber Optic Splice Closure has one oval port for express cable applications and six round cable ports, the closure features an O-ring sealing system along with an innovative latching/locking mechanism.

RGP-TSB-301A Dome Fiber Optic Splice Closure has one oval port for express cable applications and six round cable ports, the closure features an O-ring sealing system along with an innovative latching/locking mechanism. This combination is designed to allow simple, watertight closure. Utilizes heat-shrinkable technology for cable sealing which helps provide a watertight seal.


The closure is equipped with a built-in fiber management system which provides a separate area for storing, routing, protecting, and "expressing" buffer tubes, singles and ribbon fibers. The hinged splice trays include a modular splice holder design that allows them to accept single fusion, single mechanical, and various mass fusion splice (4-,6-,8- and 12- fiber ribbon) by simply replacing the splice holder.

An optional built-in air valve is designed to allow flash testing.

Closure Material: MPP - Modified P.P.

Closure Seal Material: Innovative latching / locking O-ring closure sealing system.

May be used for all fiber optic cable.

May be used for cut, uncut and taut sheath applications.

Sheath retention & central strength member fasten system included.


Built-in integral multipurpose fiber storage system.

One oval hole and six round holes for cable entrance.

Suitable for cable diameter 5mm-38mm.

360 degrees access, fiber bending > 40mm.

Maximum capacity: 288F single (24Fx12pcs) or 864F ribbon.

 

Heat-shrinkable cable seal.

Hinged tray design, Splice trays can be easily increased and reduced according to capacity.

Modular splice holder design.

Installation and reentry with a minimum of tools.

Closure can be flash tested.

Protection class: IP68.

RoHS compliance.

Aerial mounting, Pole Mounting, Buried, Under-ground, Vault, Handhole & Manhole.

Configuration

Standard Accessories:

ItemNameUsageQuantity
1FOSC CoverProtecting fiber cable splices in whole1 pc
2FOSC BaseFixing internal and external structure1 pc
3Splice cassetteFixing heat shrink protective sleeve and holding fibersMax. 12 trays (Configuration as per capacity)
4Fiber Holding TrayHolding fibers with protective coatN/A
5Pressure Testing ValveAfter inject air, it is used for  pressure testing and sealing testingConfiguration as per requirement.
6Earthing Deriving DeviceDeriving metallic parts of fiber cables in FOSC for earthing connectionConfiguration as per requirement.
7Fiber Splice Protective SleevesTo protect fiber splicesSame as capacity
8Nylon TieTo fix buffer tubes with fibers insideSame as capacity
9Grounding WireTo connect with grounding device1pc
10Abrasive ClothTo polish fiber optic cable1pc
11Labelling PaperTo label fibers1 pc
12Buffer TubeTo protect fibers and be fixed on splice trays1 pc
13Installation bolts and nutsTo fix splice cassette1 pc


Optional Accessories: Pole Mounting Kits, Grounding feed through device, Air Valve.


Shipping Infomation

SpecificationSizePcs/CartonWeight
Internal Carton Box525mmx315mmx315mm1 pc4.5 KGS
Outside Carton Box530mmx640mmx325mm2 pcs9.5 KGS


Order Information:

Model No.Splice TraySpliced fiber storage capacitySize(mm) Height x Diameter
Cable portsMax. diameter of cable(mm)
RGP-TSB-301A

Tray 301A

Capacity: 24 splices

288 Splices

(12 x 24 Splices)

515mm x 310 mm1 Oval Port+6 Round Ports

1 oval port for 1 looped cable with max 38 mm ;

6 round ports each port for 1 cable with max 17.5mm

Related Products

Inline Fiber Optic Splice Closure CSC-1033A
Inline Fiber Optic Splice Closure CSC-1033A

Inline Fiber Optic Splice Closure (RGP-CSC-1033A), It is made of plastic molded parts and gasket sealing materials.

Dome Fiber Optic Splice Closure TSB-401A
Dome Fiber Optic Splice Closure TSB-401A

RGP-TSB-401A Dome type Fiber Optic Splice Closure is also called as vertical closure, it is suitable for FTTH accessing. The input and output are on the same side. One mid-span dual-hole and six mechanical round holes facilitate the operation. It is suitable for aerial, pole mount, underground, manhole installation.

FTTH Fiber Optic Splice Closure F2E-503A
FTTH Fiber Optic Splice Closure F2E-503A

RGP-F2E-503A FTTH Drop Cable Type Fiber Optic Splice Closure provides a high density wall mounted solution for the next generation networks, which aims to provide and manage maximum numbers of fiber termination in a limited space.

Dome Fiber Optic Splice Closure TSB-203A
Dome Fiber Optic Splice Closure TSB-203A

​RGP-TSB-203A Dome Fiber Optic Splice Closure have one oval port for express cable applications and three round cable ports, the closure features an O-ring sealing system along with an innovative latching/locking mechanism.