RGP-F2E-605B Fiber Optic Splice Closure are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as Aerial, man-hole of the pipeline, embedded situation, etc. Comparing with the terminal box, the closure requires a much stricter requirement of the seal.
The installation of closure is very easy and requires no special tools or complicated training procedures. Re-enterable to allow easy access to the enclosed splices.
Fiber Optic Splice Closure Tray F2E-605B
Box Material: Modified P.P
Two halves (cover and base) structure.
Rotatable stack type fiber tray design.
Flexible configuration design inside closure.
No special tool needed, easy and low cost en-entry.
Removable cable port sealing tube design.
Inline and Butt configuration closure for single and ribbon fibers splice.
The protection grade reaches IP67.
The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.Each optical cable and fiber can be operated individually.
The closure is of small volume, big capacity and convenient maintenance.
The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.
The casing can be opened repeatedly without air leakage.
No special tools are required.
The operation is easy and simple.
Wall mounting & pole mounting installation.
Fiber Optic Splice Closure Tray F2E-605B.
